How to Pair an iClever Keyboard (Bluetooth Setup Guide)
To learn how to pair iclever keyboard models, first identify the model. For the iClever IC-BK10, long-press one of its three Bluetooth-channel buttons for 5 seconds until that channel’s light blinks. Open the Bluetooth-device list on the computer, tablet, or other device you want to connect, then select the keyboard. Once the keyboard connects, the channel light does not light up. The IC-BK10 uses Bluetooth 5.1, retains connections for up to three devices, and switches between connected devices with a single button press once first-time pairing is complete.
How to Put an iClever Keyboard into Pairing Mode
Press and hold one of the keyboard’s numbered Bluetooth channel buttons for 5 seconds until the indicator light flashes blue. That flashing light means the keyboard is discoverable and stays open for connection for about 180 seconds.
iClever Bluetooth keyboards are wireless input devices for typing on phones, tablets, computers, and some smart TVs. Models differ in layout size, rechargeable or battery power, backlighting, device switching channels, operating system compatibility, and whether they include a number pad or protective case.
As an Amazon Associate we earn from qualifying purchases.
- Turn on the keyboard with its power switch and confirm the battery has enough charge to hold a connection.
- Pick a channel button. Every standard iClever keyboard has three numbered Bluetooth buttons, one slot for each device you want stored.
- Continue holding it. Release once the LED begins flashing blue rather than staying dark or solid.
- Open Bluetooth settings on the target device and wait for the keyboard to show up among nearby devices.
- Select the keyboard’s name from the list. It usually appears as “iClever” or with a model number attached, such as IC-BK10 or IC-BK03.
- Confirm the pairing if the device asks for it.
Foldable models behave a little differently. The IC-BK03 tri-folding keyboard uses an FN + C key combination instead of a long button hold, so a quick check of the printed manual saves guesswork before the first attempt. Either method leaves the keyboard discoverable for roughly three minutes, which is plenty of time to finish the steps on the paired device without rushing.
How to Pair an iClever Keyboard with Windows, Mac, IOS, and Android
The pairing steps stay mostly the same across platforms: open Bluetooth settings, search for nearby devices, then select the keyboard by name. Only the exact menu path changes from one device to another: on Android, use Connected devices or Bluetooth depending on the phone maker’s menu labels, then tap Pair new device.
Windows 10 and Windows 11
Select the Windows icon, then Settings, then Devices (Windows 11 labels this Bluetooth & devices), then Bluetooth & other devices, then Add Bluetooth or other device, then Bluetooth. Then select Pair.
macOS
Click the Apple menu, open System Preferences (System Settings on newer macOS versions), then click Bluetooth. Select the iClever keyboard’s name in the device list to connect it.
iPad, iPhone, and Other IOS Devices
A short pause is normal while the two devices finish exchanging the connection after it appears under Other Devices.
Android
Which Devices and Operating Systems Work with an iClever Keyboard
iClever keyboards connect over standard Bluetooth to Windows, macOS, iOS, and Android, provided the device supports Bluetooth HID accessories. Effective range runs about 10 meters (33 feet), though walls and other wireless gear can shrink that in practice.
Newer keyboards in the lineup ship with Bluetooth 5.1, which improves range and battery efficiency over older Bluetooth generations. The IC-DK03 goes a step further with dual mode support, pairing over either Bluetooth 4.2 or a 2.4G wireless connection depending on which fits the situation better. A tablet without a spare USB port might favor Bluetooth, while a desktop with a free port could use the 2.4G option instead for a slightly steadier connection during fast typing.
What the iClever Keyboard’s LED Indicators Mean
A flashing Bluetooth-channel light means the IC-BK10 is in pairing mode and ready to connect. Once the keyboard connects to a device, that channel light does not light up.
Other IC-BK10 indicator lights have separate purposes. The keyboard has one light for charging and battery alerts plus a Caps Lock light, alongside its three Bluetooth-channel lights. Those five lights distinguish power and key-status information from the selected Bluetooth channel.
The three Bluetooth buttons on the IC-BK10 serve as separate device channels, allowing up to three paired Bluetooth 5.1 devices. After pairing, a single press switches between connected devices. The IC-BK10 is designed for Windows and Mac use, with key legends marked Windows/Alt and Alt/Command; the keyboard is 14.4 inches wide and is offered in silver and black.
How to Pair and Switch Between Multiple Devices
An iClever keyboard can hold pairings with up to three devices at once, one per channel button. Switching between already paired devices only takes a single button press.
To add a second or third device, use channel button 2 or 3 while that new device searches for nearby Bluetooth hardware. Each channel remembers its own pairing, so a laptop on channel 1 and a tablet on channel 2 can both stay connected without repeating the setup each time. Pressing the channel number for an already paired device swaps the active connection in under a second, with no need to open Bluetooth settings again.
Setting the Operating System Mode for Each Channel
Some models let you tell the keyboard which operating system a channel is talking to, which changes how certain keys behave. On the IC-DK03, pressing FN + Q sets a channel to iOS or Mac mode, while FN + W sets it to Windows or Android mode.
The IC-BK03 splits this further with three options: FN + Q for Android, FN + W for Windows, and FN + E for iOS. Setting the correct mode fixes issues like a misplaced Option key or a search key that opens the wrong app.
How Pairing Differs Across iClever Keyboard Models
Not every iClever keyboard pairs the same way. The table below compares the pairing method, Bluetooth version, and multi device support across four common models.
| Model | Bluetooth Version | Pairing Method | Multi Device Support | Pairing Window |
|---|---|---|---|---|
| IC-BK10 | Bluetooth 5.1 | Hold channel 1, 2, or 3 for 5 seconds | 3 devices | 180 seconds |
| IC-DK03 | Bluetooth 4.2 plus 2.4G dual mode | Hold BT1 or BT2 for 5 seconds | 3 devices | Not specified by the manufacturer |
| IC-BK03 (tri-folding) | Not specified by the manufacturer | Press FN + C | Not specified by the manufacturer | 180 seconds |
| Bluetooth 5.1 Multi-Device | Bluetooth 5.1 | Hold button 1, 2, or 3 until the light flashes | 3 devices | Not specified by the manufacturer |
Channel button models like the BK10 and DK03 share the same basic hold and release pattern. Foldable keyboards break from that pattern with a key combination instead, which is worth confirming before assuming a stuck button is a defect.
How to Fix iClever Keyboard Bluetooth Connection Problems
Most connection failures trace back to a low battery, an outdated pairing, or a device that has drifted out of Bluetooth range. Working through a short checklist usually restores the connection within a couple of minutes.
- Check the battery. A keyboard running low on charge can drop a connection or refuse to enter pairing mode at all.
- Toggle Bluetooth off and back on then let it search again.
- Stay within range. Keep both devices inside about 10 meters (33 feet) of each other, since walls and furniture can shrink that range further.
- Forget the device and re-pair it. Removing the old pairing from the device’s Bluetooth list before repeating the 5 second hold clears most stuck connections.
- Reset the keyboard. Try this if the keyboard still will not connect after the steps above.
- Cut down interference. Bluetooth speakers, WiFi routers, microwaves, and cordless phones can all disrupt a nearby Bluetooth signal.
Compatibility matters too. iClever notes that the BK10 model will not connect to Windows 7 machines, smart TVs, a Mac mini without Bluetooth HID support, Steam Deck, or some third party Bluetooth adapters. Any device used with an iClever keyboard needs Bluetooth HID support and a compatible Bluetooth version, so checking the target device’s specs first avoids a frustrating troubleshooting session later.
A quick worked example shows how the checklist plays out. Say a keyboard paired fine with a laptop last month but now refuses to reconnect after the laptop went through a Windows update.
Toggling Bluetooth off and back on rarely fixes an update related mismatch by itself, so the next move is to forget the iClever entry in Windows, then re-pair it as though setting it up for the first time. That sequence resolves the vast majority of post-update disconnects without needing a factory reset.
How to Charge an iClever Keyboard Before First Use
Charge a new iClever keyboard for at least 2 hours using the included USB cable before pairing it for the first time. A full charge on most models lasts for days, sometimes weeks, of normal typing.
Battery life varies by model. The IC-BK10 charges in under 2 hours and then runs for up to 90 hours of continuous use on that single charge. IC-BK03 units stretch even further, offering 84 hours of continuous use and standby time beyond 218 days before it needs a top up.
Pricing also varies by retailer: the Bluetooth 5.1 Multi-Device Keyboard was listed at $32.95 as of September 2026 on A.T. Guys, with free U.S. shipping on orders over $99. Listings for that model typically include the charging cable, and some bundles add a protective dust cover or a carrying pouch.
Battery Life and Charging Claims by Model
Battery life figures differ between the BK10 manual, an IC-BK10 review estimate, and broader iClever claims. Treat the BK10’s stated runtime and charging details as BK10-specific, rather than as a single specification for every iClever keyboard.
| Model or claim | Battery figure | Charging or use detail |
|---|---|---|
| IC-BK10 | 280 mAh battery | Model-specific battery capacity |
| BK10 manual | Up to 90 hours of continuous typing | Approximately 2 hours for a full charge |
| IC-BK10 review estimate | Around 900 hours of nonstop use for heavy users | Lighter users may get months of battery life |
| Broader iClever FAQ claim | Several months to a year | Some low-power models last up to 24 months |
BK10 charging uses a micro USB connector. Its charging light stays illuminated during charging and turns off when the battery is fully charged. The same manual says the keyboard enters sleep mode after 30 minutes of inactivity.
By contrast, the 900-hour figure is an IC-BK10-specific review estimate for heavy users, while the several-months-to-one-year range is a broader iClever claim. Those statements describe different models, usage patterns, and claim types, so they should not be combined into one expected runtime.
This guide does not list battery percentages or low-battery alerts, which differ by model.
Frequently Asked Questions
Does an iClever Keyboard Need a PIN to Pair?
No. iClever’s own support FAQ walks through pairing without mentioning any PIN or passcode step, and confirming the connection on the paired device is the only prompt most users see. If a device unexpectedly asks for a PIN, confirm it supports Bluetooth HID accessories before trying again.
How Do I Unpair an iClever Keyboard from a Device?
iClever’s support FAQ points owners to their device’s own Bluetooth settings rather than a keyboard shortcut. Open Bluetooth settings on the computer, phone, or tablet, select the iClever entry, then choose forget or delete device. Repeating the 5 second channel button hold reconnects the keyboard afterward.
Can I Reset an iClever Keyboard to Clear All Paired Devices?
This method addresses most stuck connections. None of those sources describe a separate factory reset that clears every stored channel at once, so check the printed manual for a specific model before assuming one exists.
Does an iClever Keyboard Work with a USB Dongle Instead of Bluetooth?
Some models support it. The IC-DK03 offers dual mode connectivity, combining Bluetooth 4.2 with a 2.4G wireless option that typically relies on a USB dongle. Other models covered in this guide rely on Bluetooth only, so check the specific listing for a dongle before assuming one is included.
Will an iClever Keyboard Pair with an Older Bluetooth Version?
The models covered here run Bluetooth 5.1 or 4.2 and require the connecting device to support Bluetooth HID. Compatibility with versions earlier than 4.2 is not addressed by iClever’s documentation, so confirming the target computer or tablet meets that minimum before buying avoids a mismatch.
Why Does an iClever Keyboard Keep Disconnecting After It Pairs?
A connection that drops repeatedly usually points to a low battery, a device that wandered outside the 10 meter range, or interference from another wireless gadget nearby. Forgetting the pairing and repeating the 5 second channel hold clears most recurring drops, and moving the router or Bluetooth speaker further from the desk helps when interference is the culprit.
Pairing follows the process described above. Keeping the battery charged and the keyboard within range prevents most of the connection problems new owners run into during that first week of use. Labeling each channel button by device, such as a sticky note reading laptop, tablet, or phone, saves a few seconds every time the keyboard needs to switch targets during a busy workday.
References
- Bluetooth Keyboard FAQ, iClever
- iClever IC-BK10 Pairing Instructions, AnswerBase Manuals
- iClever Bluetooth 5.1 Multi-Device Keyboard, A.T. Guys
- iClever Tri-Folding Bluetooth Keyboard Review, MakeTechEasier
- iClever IC-BK10 Review, Nymy Net
Sources read in September 2026.